Using the Remote UI

Last Updated : 07-Dec-2007
Issue Number : 8100140900


The Remote UI software enables you to access and manage the machine connected to a network using a web browser.
  • Check the machine status from a network computer
  • Set and control the machine from a computer

Before using Remote UI, please do the following settings:

1. Press [Additional Functions].
2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK]. If the System Password has been set, enter the System Password using the numeric keys, then press [OK].
3. Press [<-] or [+>] <NETWORK SETTINGS>, then press [OK].
4. Press [<-] or [+>] to select <TCP/IP SETTINGS>, then press [OK].
5. Press [<-] or [+>] to select <USE HTTP>, then press [OK].
6. Press [<-] or [+>] to select <ON> or <OFF>, then press [OK].
  • <ON>: Uses the Remote UI.
  • <OFF>: Does not use the Remote UI.
7. Press [Stop/Reset] to return to the standby mode.
8. Restart the machine.

Before you start the Remote UI, select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in the <SYSTEM SETTINGS>, and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator.

1. Start the web browser.

2. Enter the IP address of the machine in [Address] or [Location] → press [Enter] on the keyboard.

The Remote UI screen appears.

3. Enter the required information.

  • For [Administrator Mode], enter the System Manager password if required.
  • For [End-User Mode], enter your user name.

4. Click [OK].

[Device] - [Status] page is displayed when you logon the Remote UI.

A. Displays the current status of the machine, etc.

B. Takes you to the Remote UI top page.

C. Displays the online help for the Remote UI.

D. Displays the current status of print jobs, etc.

E. Takes you back to the top of a current page.

F. Displays a list of settings for the machine, etc.

G. Displays the Address Book data (one-touch speed dialing keys, etc.) registered on the machine.

"Was this helpful?"

Click here to go back.